pe管道系统-ag电子游戏

煤矿井下用塑料（聚乙烯）管材

压力等级：煤矿井下用供水排水、压风、喷浆管材公称压力为0.4mpa～1.6 mpa
抽放瓦斯气体管材的最高公称压力为-0.097mpa。
规格型号：dn20mm～dn1200mm
燃气用埋地聚乙烯（pe）管材

规格型号：dn20mm～dn630mm。
给水用聚乙烯（pe）管材

压力等级：0.4mpa～1.6mpa。
规格型号：dn20mm～dn1200mm。
电熔异径直接

规格型号：dn 50mm～dn 315mm
pe燃气用冷凝水缸

压力等级：燃气输配工作压力不大于0.5mpa
pressure grade: the gas distribution working pressure is not larger than 0.5mpa
规格型号：dn 63mm～dn 315mm
specification and model: dn 63mm～dn 315mm
pe注塑管帽

压力等级：输水工作压力dn＜400mm pe注塑管帽最大公称压力1.25mpa， dn≥400mm pe注塑管帽最大公称压力1.0mpa；燃气输配压力可达0.4mpa
pressure grade: for water conveying working pressure, when dn＜400mm, the maximum nominal pressure of pe plastic injection pipe cap is 1.25mpa; when dn≥400mm, the maximum nominal pressure of pe plastic injection pipe cap is 1.0mpa; the gas distribution pressure can reach 0.4mpa.
规格型号：dn 25mm～dn 630mm
specification and model: dn 25mm～dn 630mm
pe焊制四通

压力等级：适用于工作压力不大于1.25mpa
pressure grade: suitable for the working pressure not larger than 1.25mpa
规格型号：dn 90mm～dn 1000mm
specification and model: dn 90mm～dn 1000mm
pe 注塑四通

压力等级：适用于工作压力不大于1.6mpa
pressure grade: suitable for the working pressure not larger than 1.6mpa

规格型号：dn 63mm～dn 355mm
specification and model: dn 63mm～dn 355mm
pe 90°弯头

90°注塑弯头压力等级：dn＜400mm pe 90°注塑弯头最大公称压力1.6mpa，dn≥400mm，pe 90°注塑弯头最大公称压力1.0mpa
pressure grade: for pe 90° plastic injection elbow with dn＜400mm, the maximum nominal pressure is 1.6mpa. for pe 90° plastic injection elbow with dn≥400mm, the maximum nominal pressure is 1.0mpa.
规格型号：dn 90mm～dn 630mm
specification and model: dn 90mm～dn 630mm
90°焊制弯头压力等级：适用于工作压力不大于1.25mpa
pressure grade: suitable for the working pressure not larger than 1.25mpa
规格型号：dn 250mm～dn 1200mm
specification and model: dn 250mm～dn 1200mm